| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | Yes |
|
Still deciding? Get samples of US$ 17/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
FIRIP's thread button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized thread button drill bits according to different drilling application, and custom drill bits are applicable to drill soft rock, loose-medium rock and hard rock.
| Thread Button Bits | |||||
| Description | Diameter (mm) | Buttons No. | Water hole | Buttons angle ° | Weight (kgs) |
| Thread 25R |
38 | 5 | 2 | 30° | 0.5 |
| 41 | 5 | 2 | 30° | 0.6 | |
| 45 | 5 | 2 | 30° | 0.7 | |
| 48 | 5 | 2 | 30° | 0.78 | |
| 38 | 7 | 3 | 30° | 0.54 | |
| 41 | 7 | 3 | 30° | 0.7 | |
| 45 | 7 | 3 | 30° | 0.78 | |
| Thread 28R |
41 | 5 | 2 | 30° | 0.6 |
| 45 | 5 | 3 | 30° | 0.7 | |
| 48 | 5 | 3 | 30° | 0.78 | |
| 38 | 7 | 3 | 30° | 0.54 | |
| 41 | 7 | 3 | 30° | 0.7 | |
| 45 | 7 | 3 | 30° | 0.75 | |
| 48 | 7 | 3 | 30° | 0.8 | |
| Thread 32R |
45 | 5 | 3 | 30° | 0.6 |
| 48 | 5 | 3 | 30° | 0.8 | |
| 41 | 7 | 3 | 30° | 0.54 | |
| 43 | 7 | 3 | 30° | 0.55 | |
| 45 | 7 | 3 | 30° | 0.6 | |
| 48 | 7 | 3 | 30° | 0.8 | |
| 51 | 7 | 3 | 30° | 0.85 | |
| Thread 38R |
64 | 13 | 5 | 30° | 2 |
| 64 | 12 | 3 | 30° | 2 | |
| 70 | 12 | 4 | 35° | 2 | |
| 70 | 13 | 5 | 35° | 2.2 | |
| 76 | 13 | 5 | 30° | 2.5 | |
| 76 | 10 | 4 | 35° | 2.6 | |
| 76 | 12 | 4 | 35° | 2.8 | |
| 76 | 12 | 4 | 35° | 2.8 | |
| Thread Button Bits | |||||
| Description | Diameter (mm) | buttons No. | Water hole | Buttons angle | Weight approx (kgs) |
| Thread 38T |
64 | 12 | 4 | 30° | 1.9 |
| 64 | 12 | 2 | 30° | 1.9 | |
| 64 | 13 | 5 | 30° | 1.9 | |
| 64 | 9 | 3 | 35° | 1.9 | |
| 70 | 12 | 4 | 30° | 2.5 | |
| 76 | 12 | 4 | 35° | 3 | |
| 76 | 12 | 2 | 40° | 3 | |
| 76 | 11 | 4 | 35° | 3 | |
| 76 | 13 | 4 | 35° | 3 | |
| 89 | 12 | 2 | 40° | 4.2 | |
| 89 | 14 | 5 | 35° | 4 | |
| 89 | 14 | 4 | 35° | 4.1 | |
| 89 | 11 | 3 | 35° | 4.2 | |
| 102 | 14 | 2 | 35° | 5 | |
| Thread 45T |
76 | 12 | 4 | 35° | 2.5 |
| 76 | 12 | 2 | 40° | 2.5 | |
| 76 | 12 | 3 | 35° | 2.5 | |
| 76 | 13 | 5 | 35° | 2.5 | |
| 76 | 13 | 3 | 35° | 2.6 | |
| 76 | 13 | 4 | 35° | 2.6 | |
| 80 | 13 | 4 | 35° | 3 | |
| 89 | 12 | 2 | 35° | 4 | |
| 89 | 11 | 3 | 35° | 4 | |
| 89 | 14 | 2 | 35° | 5 | |
| 89 | 13 | 5 | 35° | 4.5 | |
| 89 | 14 | 3 | 35° | 5 | |
| 89 | 13 | 2 | 35° | 4.5 | |
| 102 | 14 | 2 | 35° | 5.8 | |
| 115 | 15 | 2 | 35° | 6.8 | |
| Thread 51T |
89 | 12 | 2 | 40° | 4 |
| 89 | 14 | 5 | 35° | 4 | |
| 95 | 14 | 5 | 35° | 4.8 | |
| 102 | 14 | 4 | 35° | 5.6 | |
| 102 | 14 | 5 | 35° | 5.6 | |
| Thread Button Bits | |||||
| Description | Diameter (mm) | buttons No. | Water hole | Buttons angle | Weight (kgs) |
| Retract Thread button bit 45T |
76 | 12 | 2 | 40° | 3.5 |
| 76 | 12 | 4 | 35° | 3.5 | |
| 76 | 13 | 5 | 30° | 3.6 | |
| 76 | 14 | 4 | 35° | 3.62 | |
| 80 | 13 | 5 | 30° | 4.2 | |
| 89 | 14 | 3 | 35° | 5.5 | |
| 89 | 12 | 2 | 40° | 5.4 | |
| 89 | 14 | 5 | 35° | 5.6 | |
| 89 | 14 | 5 | 35° | 5.6 | |
| 95 | 14 | 5 | 35° | 6.6 | |
| 102 | 14 | 5 | 35° | 7.8 | |
| 102 | 14 | 5 | 35° | 7.8 | |
Our advantages are bellowing:
A. Our products can match over 95% against the original products.
B. Price are competitive against the famous brands and best quality against the small factory.
C.Faster delivery and flexible shipping ports ensure that customers can get the products they want in the shortest possible time.
D.We have better and more professional services, allowing customers to always maintain a good feedback rate on our products.
FIRIP Drill Tools Button bit - For 22 mm (7/8") hex. Rod 7° taper angle. Long skirt
|
|||||||||||||||||||||||||||||||||||
| 30 | 1 ³⁄16" | 80 | 3 5⁄32" | 7 | 5x6 | 2x7 | 35° | 15° | 2 | 1 | 0.2 | ||||||||||||||||||||||||
| 32 | 1 ¼" | 80 | 3 5⁄32" | 7 | 5x7 | 2x7 | 35° | 15° | 1 | 1 | 0.3 | ||||||||||||||||||||||||
| 33 | 1 5⁄16" | 80 | 3 5⁄32" | 8 | 6x7 | 2x7 | 40° | 15° | 1 | 2 | 0.3 | ||||||||||||||||||||||||
| 33 | 1 5⁄16" | 80 | 3 5⁄32" | 9 | 6x7 | 3x7 | 40° | 20° | 3 | 0.4 | |||||||||||||||||||||||||
| 35 | 1 ⅜" | 80 | 3 5⁄32" | 7 | 5x8 | 2x7 | 40° | 15° | 1 | 1 | 0.4 | ||||||||||||||||||||||||
| 37 | 1 ¹5⁄32" | 80 | 3 5⁄32" | 7 | 5x9 | 2x7 | 40° | 15° | 1 | 1 | 0.4 | ||||||||||||||||||||||||
| 41 | 1 ⅝" | 80 | 3 5⁄32" | 7 | 5x9 | 2x8 | 40° | 15° | 1 | 1 | 0.4 | ||||||||||||||||||||||||
| FIRIP Drill Tools Button bit - For 22 mm (7/8") hex. Rod. 11° taper angle. Short skirt. | |||||||||||
| Diameter | Length | No. of buttons | Buttons x button diameter | Gauge buttons angle° |
buttons angle° | Flushing hole | Weight approx. | ||||
| mm | inch | mm | inch | mm | mm | Side | Center | kg | |||
| 32 | 1 ¼" | 55 | 2 5⁄32" | 8 | 6x7 | 2x7 | 39° | 15° | 1 | 1 | 0.2 |
| 32 | 1 ¼" | 50 | 1 ³¹⁄32" | 6 | 4x7 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| 34 | 1 ¹¹⁄32" | 50 | 1 ³¹⁄32" | 5 | 3x8 | 2x7 | 35° | - | 2 | 1 | 0.2 |
| 34 | 1 ¹¹⁄32" | 50 | 1 ³¹⁄32" | 9 | 6x7 | 3x7 | 40° | 20° | 2 | 0.3 | |
| 34 | 1 ¹¹⁄32" | 50 | 1 ³¹⁄32" | 6 | 4x7 | 2x7 | 40° | - | 1 | 1 | 0.2 |
| 35 | 1 ⅜" | 55 | 2 5⁄32" | 7 | 5x8 | 2x7 | 40° | 15° | 1 | 1 | 0.3 |
| 36 | 1 ¹³⁄32" | 50 | 1 ³¹⁄32" | 7 | 5x8 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| 36 | 1 ¹³⁄32" | 50 | 1 ³¹⁄32" | 5 | 3x8 | 2x8 | 40° | - | 2 | 1 | 0.2 |
| 38 | 1 ½" | 50 | 1 ³¹⁄32" | 4 | 3x9 | 1x9 | 40° | - | 2 | 1 | 0.3 |
| 38 | 1 ½" | 50 | 1 ³¹⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| 41 | 1 ⅝" | 50 | 1 ³¹⁄32" | 7 | 5x9 | 2x7 | 35° | - | 2 | 1 | 0.3 |
| 43 | 1 ¹¹⁄16" | 50 | 1 ³¹⁄32" | 7 | 5x9 | 2x9 | 35° | - | 2 | 1 | 0.4 |
| FIRIP Drill Tools Button bit - For 22 mm (7/8") hex. Rod. 12° taper angle. Short skirt. | |||||||||||
| Diameter | Length | No. of buttons | Buttons x button diameter | Gauge buttons angle° |
buttons angle° | Flushing hole | Weight approx. | ||||
| mm | inch | mm | inch | mm | mm | Side | Center | kg | |||
| 27 | 1 ¹¹⁄16" | 50 | 1 ³¹⁄32" | 6 | 4x8 | 2x6 | 40° | 15° | 1 | 1 | 0.2 |
| 28 | 1 ⅛" | 50 | 1 ³¹⁄32" | 4 | 3x7 | 1x7 | 20° | - | 1 | 1 | 0.1 |
| 28 | 1 ⅛" | 50 | 1 ³¹⁄32" | 6 | 4x6 | 2x6 | 35° | - | 1 | 1 | 0.2 |
| 30 | 1 ³⁄16" | 50 | 1 ³¹⁄32" | 6 | 4x7 | 2x7 | 30° | - | 1 | 1 | 0.2 |
| 32 | 1 ¼" | 55 | 2 5⁄32" | 7 | 5x7 | 2x7 | 35° | - | 1 | 2 | 0.3 |
| 32 | 1 ¼" | 55 | 2 5⁄32" | 7 | 5x7 | 2x7 | 35° | - | 1 | 1 | 0.2 |
| 32 | 1 ¼" | 55 | 2 5⁄32" | 8 | 6x7 | 2x7 | 39° | 15° | 1 | 2 | 0.3 |
| 33 | 1 5⁄16" | 55 | 2 5⁄32" | 7 | 5x7 | 2x7 | 35° | - | 1 | 2 | 0.2 |
| 33 | 1 5⁄16" | 55 | 2 5⁄32" | 7 | 5x7 | 2x7 | 35° | - | 1 | 1 | 0.2 |
| 33 | 1 5⁄16" | 55 | 2 5⁄32" | 8 | 6x7 | 2x7 | 35° | - | 1 | 2 | 0.2 |
| 33 | 1 5⁄16" | 55 | 2 5⁄32" | 7 | 5x8 | 2x7 | 40° | 15° | 1 | 1 | 0.2 |
| 34 | 1 ¹¹⁄32" | 55 | 2 5⁄32" | 7 | 5x8 | 2x7 | 35° | - | 1 | 1 | 0.2 |
| 35 | 1 ⅜" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.2 |
| 36 | 1 ¹³⁄32" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| 37 | 1 ¹5⁄32" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 40° | - | 1 | 1 | 0.3 |
| 38 | 1 ½" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 40° | - | 1 | 1 | 0.3 |
| 38 | 1 ½" | 55 | 2 5⁄32" | 4 | 3x9 | 1x9 | 40° | - | 1 | 1 | 0.2 |
| 38 | 1 ½" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.2 |
| 38 | 1 ½" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.2 |
| 41 | 1 ⅝" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| 45 | 1 ¾" | 55 | 2 5⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| FIRIP Drill Tools Button bit - For 22 mm (7/8") hex. Rod 12° taper angle. Long skirt |
|||||||||||
| Diameter | Length | No. of buttons | Buttons x button diameter | Gauge buttons angle° |
buttons angle° | Flushing hole | Weight approx. | ||||
| mm | inch | mm | inch | mm | mm | Side | Center | kg | |||
| 32 | 1¼" | 71 | 2 ²5⁄32" | 7 | 5x7 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| 33 | 1 5⁄16" | 71 | 2 ²5⁄32" | 7 | 5x7 | 2x7 | 35° | - | 1 | 1 | 0.3 |
| 33 | 1 5⁄16" | 71 | 2 ²5⁄32" | 8 | 6x7 | 2x7 | 40° | 15° | 1 | 2 | 0.3 |
| 33 | 1 5⁄16" | 71 | 2 ²5⁄32" | 9 | 6x7 | 3x7 | 40° | 20° | 3 | - | 0.3 |
| 35 | 1 ⅜" | 71 | 2 ²5⁄32" | 8 | 6x8 | 2x7 | 45° | 15° | 1 | 2 | 0.3 |
| 38 | 1 ½" | 71 | 2 ²5⁄32" | 7 | 5x9 | 2x7 | 35° | - | 1 | 1 | 0.4 |
Putian FIRIP Mining&Machinery Co., Ltd is specializing a manufacture of drill tools for 23 years in China. It mainly studies and manufactures the low&high pressure down-the-hole impactors, various down-the-hole drills, drill pipes and drilling tools. The products are widely used in earthwork, mining, water well engineering and construction. Geothermal drilling, etc.
Our domestic brands in China are mainly Yongchuang. We have about 5,000 square kilometers of standard plant, complete equipment, advanced technology, reliable and stable quality which has won the praise of most of the domestic and foreign markets. In recent years, with the continues growth of the company's sales, target market gradually exported to all over the world, Nowadays, our products are exported to more than18 countries and regions in Russia, Central Asia, Southeast Asia, the Middle East, Africa and South America. We always continuously improved the industry standards for rock drilling and drilling tools. We are committed to establish a stable cooperative relationship with customers and suppliers from all over the world, mutual benefit and common development.
1. Are you a manufacturer or trading company?
We are one of the earliest professional drilling tool manufacturers in mainland China.
2. How many workers are there in your factory? What is the size of your company?
There are currently more than 80 employees. The company has many senior mechanical design engineers with more than 20 years of experience in drilling tool design. The production technology and technology are at the first-class level in China. It covers an area of 5,000 square meters and has more than 60 sets of various advanced equipment and facilities required for manufacturing rock drilling tools. More than 50% of the products are exported, covering most markets around the world, including the Middle East, Central Asia, Africa, and Southeast Asia.
3. Where is your company located?
We are located in Putian City, Fujian Province, about 200 kilometers away from Xiamen International Port.
4. Why choose FIRIP drill bits?
1) We have more than 20 years of experience in researching, developing, manufacturing and supplying high quality rock drilling tools to all over the world.
2) We have super high quality and cheap price.
3) Excellent service.
5. Which port do you ship from?
We usually ship containers from Xiamen Port. Or customers can specify any port in mainland China
6. Can you accept OEM and ODM?
Yes, both are acceptable.
7. What is your minimum order quantity?
Our MOQ is 1 piece or 1 set, the price may depend on the order quantity.
8. What is your payment term?
We can accept wire transfer, Western Union and cash.
9. How about the delivery time?
It usually takes about 15-20 days.
10. Can we make an appointment with your company?
Yes, you are very welcome to refer to our factory.
){kind=link}